Deploy the LMA Light observability stack on MicroK8s
|Summary||Deploy the LMA Light observability stack on MicroK8s.|
This tutorial assumes you have a JuJu controller bootstrapped on a MicroK8s cloud that is ready to use. A typical setup using snaps can be found in the Juju docs. Follow the instructions there to install Juju and MicroK8s.
Let’s go and deploy that bundle!
Deploy the LMA bundle
Before deploying anything you must have a Juju model. It is usually a good idea to create a dedicated model for the LMA bundle. So let’s do just that and call the new model
juju add-model lma juju switch lma
Next, deploy the bundle with:
juju deploy lma-light --channel=edge --trust
Now you can sit back and watch the deployment take place:
watch -n 5 --color juju status --relations --color
The status of your deployment should eventually be very similar to the following:
> juju status --relations Model Controller Cloud/Region Version SLA Timestamp lma lma-uk8s microk8s/localhost 2.9.15 unsupported 16:53:38-00:00 App Version Status Scale Charm Store Channel Rev OS Address Message alertmanager active 1 alertmanager-k8s charmhub edge 6 kubernetes 10.152.183.175 grafana active 1 grafana-k8s charmhub edge 10 kubernetes 10.152.183.156 loki active 1 loki-k8s charmhub edge 6 kubernetes 10.152.183.6 prometheus active 1 prometheus-k8s charmhub edge 10 kubernetes 10.152.183.227 Unit Workload Agent Address Ports Message alertmanager/0* active idle 10.1.24.70 grafana/0* active idle 10.1.24.71 loki/0* active idle 10.1.24.82 prometheus/0* active idle 10.1.24.73 Relation provider Requirer Interface Type Message alertmanager:alerting prometheus:alertmanager alertmanager_dispatch regular alertmanager:replicas alertmanager:replicas alertmanager_replica peer grafana:grafana-peers grafana:grafana-peers grafana_peers peer loki:grafana-source grafana:grafana-source grafana_datasource regular prometheus:grafana-source grafana:grafana-source grafana_datasource regular
Now LMA Light is good to go: you can relate software with it to begin the monitoring!
Alternatively, you may want to deploy the bundle with one or more of our readily available overlays, which is what we’ll cover next.
Deploy the LMA bundle with overlays
An overlay is a set of model-specific modifications that avoid repetitive overhead in setting up bundles like LMA Light.
Specifically, we offer the following overlays:
storage-smalloverlay applies some defaults for the various storages used by the LMA Light components.
You can apply the
offers overlay do an existing LMA Light bundle by executing the
juju deploy command.
storage-small overlay, however, is applicable only on the first deployment.
So, if you were following the previous steps you would first need to switch to a new Juju model or remove all applications from the current one.
To use any of the overlays above, you need to include an
--overlay argument per overlay (applied in order):
curl -L https://raw.githubusercontent.com/canonical/lma-light-bundle/main/overlays/offers-overlay.yaml -O curl -L https://raw.githubusercontent.com/canonical/lma-light-bundle/main/overlays/storage-small-overlay.yaml -O juju deploy lma-light --channel=edge --overlay ./offers-overlay.yaml --overlay ./storage-small-overlay.yaml
When all the charms are deployed you can head over to browse their built-in web-UIs. You can find out their addresses from
juju status, which should have a section similar to:
Unit Workload Agent Address Ports Message alertmanager/0* active idle 10.1.24.70 grafana/0* active idle 10.1.24.71 loki/0* active idle 10.1.24.82 prometheus/0* active idle 10.1.24.73
In this case, the dashboards would be something like:
http://10.1.24.70:9093, for alertmanager
http://10.1.24.71:3000, for grafana
http://10.1.24.73:9090, for prometheus
(Note: the IP addresses are almost certainly going to be different in your case.)
That’s all folks!
Congrats, you made it! You should now be able to easily:
- deploy the LMA Light observability stack
- augment the LMA Light bundle file with ready-made overlays
- find the URLs of the web-UI dashboards
- Use the scrape target charm to have the LMA stack scrape any open-metrics target.
- Relate your own charm to the LMA stack with relation interfaces such as
- If you need support, the charmhub community is the best place to get all your questions answered and get in touch with the community.
Last updated 3 days ago.